What's new

Recent releases have focused on making every switch honest and every profile safe: a failed save no longer loses your profiles, a switch reports what really happened and two switches at once take turns. Before that came a Guide behind the Help menu, a window drawn entirely in pictures, a setup program that shows one screen at a time and the move from Windows alone to Windows, macOS and Linux.

v2.4.0

A failed save no longer loses your profiles

  • Profiles are written somewhere safe first and only then put in place, so a save that fails part way (on a full disk, say) leaves them exactly as they were. The copy before each save is kept beside the file as profiles.json.bak
  • Setting a profile's output or input to (None) now removes the device instead of saying "Saved" and keeping it
  • A switch reports what really happened. On Windows it names the uses that kept the old device; after every switch Audio Deck reads the defaults back, so a change the system accepted but did not make is reported rather than shown as done
  • Turning on a device a profile was waiting for applies only that device, so it no longer undoes a switch you made since
  • Two switches at once, such as two Stream Deck keys pressed together, now take turns instead of leaving the output of one profile with the input of the other
  • On macOS a device that drops out at the moment of a switch is waited for and applied when it comes back
  • Plainer messages: an offline device will apply when it reconnects as the same device, "Could not read devices" replaces a misleading "not available" and the command line gives each reason its own heading
  • On Linux and macOS an unexpected file-locking error no longer stops the window opening
v2.3.0

Setup messages and the Linux licence listing put right

  • The setup program no longer asks you to close Audio Deck "including its tray icon", since Audio Deck has no tray icon
  • The Flatpak's software-centre listing states the real licence split: GPL-3.0 for the backend and LGPL-3.0 for the interface, each at that version only
  • Every footer on this site links every page; the stylesheet link changes whenever the stylesheet does, so a browser never pairs a new page with old styles
  • The documents name the PipeWire tools the Linux backend falls back on
v2.2.2

A new donation page

  • The Donate button now opens a new PayPal page that suggests £5 and lets you give any amount you choose. Nothing else has changed
v2.2.1

Tooltips show while another program has focus

  • Every button's tooltip now appears whichever program has focus, in the main window, its dialogs and the setup program
  • The Why page no longer links to a retired blog post
v2.2.0

A Guide on the Help menu

  • The first entry on the Help menu is now Guide. Every picture button is listed with its own artwork beside its name and what it does
  • Command lines and file locations sit in shaded blocks; each troubleshooting point leads with its problem in bold
  • On Linux and macOS the command line names the command your platform actually uses rather than AudioDeck.exe; its help no longer calls Audio Deck a Windows program
  • The macOS download button on this site now points at AudioDeck.dmg, the disk image each release publishes
  • A commercial licence is available for anyone whose project the open-source licences do not suit
v2.1.0

Every button is artwork now

  • Every emoji control is now a picture drawn in one visual language, considerably larger, each naming itself through a tooltip. Deleting and cancelling read as a red bar struck through the thing being acted on
  • A redrawn application icon appears everywhere the old one did
  • The header carries a donate button that opens a payment page in your own browser. Audio Deck sends nothing itself; nothing is held back behind it
  • About now carries a copyright line under the author
  • A picture button no longer stays outlined after a click; the outline comes from Tab alone
  • The setup program shows one screen at a time: a sentence saying what it is about to do, a progress screen while it works, a screen of its own for removing Audio Deck and a closing screen saying how it went
  • Only the generated artwork is packaged, which takes about fourteen megabytes out of every build
v2.0.2

A quieter profile list; setup says when the app is in the way

  • Pointing at the profile list no longer draws a rectangle round the whole list; the highlighted profile already shows where you are
  • Installing while Audio Deck is open no longer stops with a permission error naming a file path. The setup program checks first, offers to close Audio Deck for you and waits until it has gone
  • Carries the fixes from 2.0.1
v2.0.1

Deleted profiles disappear immediately

  • Entering either view reloads the profile list, so a save, edit or delete in one view shows in the other the moment you switch back
  • This site and the documentation describe the 2.0 application as it is, with current screenshots
v2.0.0

Linux and macOS as well as Windows

  • Audio Deck runs on Linux and macOS with the same profiles, the same window, the same command line and the same Stream Deck workflow on all three; the interface was overhauled too
  • On Linux it works with PulseAudio or PipeWire, leaves out monitor sources and picks up device changes live. It ships as a Flatpak
  • On macOS it speaks to CoreAudio directly with no new dependency and identifies devices by a stable ID, so profiles survive reboots and unplugs. It ships as a signed, notarised DMG
  • Profiles live in each platform's proper per-user data folder; only one window runs per user on every platform
v1.5.0

An update check that respects you

  • A few seconds after launch and once a day while the window is open, Audio Deck asks GitHub whether a newer version has been published, then offers Download, Skip This Version or Later
  • Help > Check for Updates runs a real check and reports every outcome, including an honest failure when GitHub cannot be reached
  • The request carries no identifier and nothing about your profiles; a failed check on the automatic path says nothing
v1.4.0

A Why page and a tidier codebase

  • Nothing in how Audio Deck behaves has changed
  • The site gains a Why page, link previews for chat and social media and an address of its own
  • The two developer guides are now one; the in-app Documentation dialog lists the guides that actually exist
  • The main window and the entry point were split into smaller files under a measured size rule
v1.3.0

One window at a time

  • Only one Audio Deck window can be open; launching it again brings the existing window to the front. Switching from the command line or a Stream Deck key is unaffected
  • Every action button carries an icon; the profile actions gained tooltips
  • Audio Deck gets a website of its own, with a download panel that reads the current release from GitHub
  • Branch coverage, more structural tests and a clean ruff and mypy run across the whole repository
v1.2.0

Bluetooth, offline devices and a window that never freezes

  • A crash when changing audio sources with no default device is fixed; a Bluetooth headset turning on or off can no longer crash the app
  • Disconnected devices can be chosen when building a profile. Switching applies what is available, reports what is offline and applies an offline device the moment it reconnects
  • Scans and switches run in the background, so the window stays responsive
  • A themed splash screen, a Check for Updates item in the Help menu and a themed Windows installer with Install, Update, Reinstall, Repair and Uninstall
v1.1.2

Every icon size on Windows

  • Supports all icon sizes Windows asks for
v1.1.1

A new taskbar icon and splash screen

  • Updated taskbar icon and splash screen
v1.1.0

Revised icons and About

  • Revised iconography
  • Updates to Help > About
  • Minor changes to audio handling
v1.0.3

Taskbar icon shown correctly

  • The app's taskbar icon now shows correctly where before it did not
v1.0.2

Taskbar icon support

  • Adds support for the app's own taskbar icon
v1.0.1

No console window

  • Audio Deck no longer opens a console window alongside its own
  • Versioning consolidated into fewer files; the README updated
v1.0.0

The first release

  • Create profiles for your Windows audio setup and save them
  • Apply a profile from the app itself, from the command line or from a Stream Deck key: --list lists your profiles and --profile applies one by name