Voron 0.2 config

The printer has gone to a new home; its configuration stays here as a working reference for a Voron 0.2 on a BTT SKR Mini E3 V3 with an LDO Picobilical umbilical board. Open any file to read it with highlighting, copy it or download it.

Files

• printer.cfgprinter.cfg · 540 lines
• LDO Picobilicalpicobilical.cfg · 160 lines
• Displaydisplay.cfg · 31 lines
• ADXL MCUadxlmcu.cfg · 26 lines
• Mainsail macrosmainsail_macros.cfg · 64 lines
• KIAUH macroskiauh_macros.cfg · 59 lines
• moonraker.confmoonraker.conf · 48 lines
• webcam.txtwebcam.txt · 79 lines